they are in the post above.
SZGBFIX.rar
Welcome to the Gamebase 64 forums. An attempt to document ALL Commodore 64 gameware before it's too late!
GB64 works but emu wont run...
Moderator: Jimbo
- subzero1970
- New Member
- .mad.
- Honoured Member
- Location: Lancashire
Post
that's odd, the file is only 10MB.
I just downloaded it myself in 20 seconds.
Just to confirm, the emulators are in this link.
http://www.datafilehost.com/download-7aea139c.html
if you still can't get the file to download, for whatever reason.
PM me your email address and i will send it to you directly.
I just downloaded it myself in 20 seconds.
Just to confirm, the emulators are in this link.
http://www.datafilehost.com/download-7aea139c.html
if you still can't get the file to download, for whatever reason.
PM me your email address and i will send it to you directly.
- subzero1970
- New Member
- subzero1970
- New Member
- .mad.
- Honoured Member
- Location: Lancashire
Post
each gamebase requires it's own emulator.ini and folder.
you can not run c64 games in a spectrum emulator.
that was your initial problem.
you will need to copy your spectrum gamebase folder to
c:\gamebase\
the folder should have the same name as the mdb file.
c:\gamebase\GB_ZX2\GB_ZX2.mdb
c:\gamebase\GB_ZX2\emulators.ini
then edit the emulators.ini to the spectrum emulator location.
[Emulators]
1=spin
2=Spectaculator
3=Spectaculator 6
4=
[Spectaculator]
UseShortFilenames=0
UseDefaultTypes=0
SupportedTypes=TZX;TAP;DSK;Z80;SNA;RZX;SZX
EmulatorPathFile=C:\GameBase\GB_ZX2\emulators\spectaculator\Spectaculator.exe
ScriptFile=Spectaculator.txt
WaitFinish=1
1=
[Spectaculator 6]
UseShortFilenames=0
UseDefaultTypes=0
SupportedTypes=TZX;TAP;BLK;CSW;Z80;SNA;RZX;SZX;MDR;ROM;TRD;SCL;FDI;YDI;DSK
EmulatorPathFile=C:\GameBase\GB_ZX2\emulators\spectrum\spectaculator 6.25\Spectaculator.exe
ScriptFile=Spectaculator V6.txt
WaitFinish=1
1=
[spin]
UseShortFilenames=0
UseDefaultTypes=0
SupportedTypes=Z80;TAP;TZX;SNA;RZX;SZX;TRD;BLK;CSW;DSK;MDR;ROM;SCL;FDI;YDI
EmulatorPathFile=C:\GameBase\GB_ZX2\emulators\SPIN061\ZXSpin.exe
ScriptFile=SPIN.txt
WaitFinish=1
1=
you can not run c64 games in a spectrum emulator.
that was your initial problem.
you will need to copy your spectrum gamebase folder to
c:\gamebase\
the folder should have the same name as the mdb file.
c:\gamebase\GB_ZX2\GB_ZX2.mdb
c:\gamebase\GB_ZX2\emulators.ini
then edit the emulators.ini to the spectrum emulator location.
[Emulators]
1=spin
2=Spectaculator
3=Spectaculator 6
4=
[Spectaculator]
UseShortFilenames=0
UseDefaultTypes=0
SupportedTypes=TZX;TAP;DSK;Z80;SNA;RZX;SZX
EmulatorPathFile=C:\GameBase\GB_ZX2\emulators\spectaculator\Spectaculator.exe
ScriptFile=Spectaculator.txt
WaitFinish=1
1=
[Spectaculator 6]
UseShortFilenames=0
UseDefaultTypes=0
SupportedTypes=TZX;TAP;BLK;CSW;Z80;SNA;RZX;SZX;MDR;ROM;TRD;SCL;FDI;YDI;DSK
EmulatorPathFile=C:\GameBase\GB_ZX2\emulators\spectrum\spectaculator 6.25\Spectaculator.exe
ScriptFile=Spectaculator V6.txt
WaitFinish=1
1=
[spin]
UseShortFilenames=0
UseDefaultTypes=0
SupportedTypes=Z80;TAP;TZX;SNA;RZX;SZX;TRD;BLK;CSW;DSK;MDR;ROM;SCL;FDI;YDI
EmulatorPathFile=C:\GameBase\GB_ZX2\emulators\SPIN061\ZXSpin.exe
ScriptFile=SPIN.txt
WaitFinish=1
1=
- subzero1970
- New Member
Post
no, what i mean is the shortcut you would normally see when u run the frontend has gone missing, whereas my copy over of amiga gamebase and vic20 gamebase are still working ok.
- Hidron
- Cool Member
- Location: USA
Post
It sounds like maybe you have a completely different frontend install for each gamebase? You only need 1 copy of the Gamebase front end, with 1 shortcut to it. The individual systems then go into subfolders under the front ends folder. Then when you start Gamebase a window opens asking which gamebase you want to run. You can then switch from within the front end to another gamebase.
- subzero1970
- New Member
- subzero1970
- New Member
Post
ok ive got gbzx to appear again but now im getting a GEMUS.DAT error on line 15 when i run the emulator setup wizard!
- .mad.
- Honoured Member
- Location: Lancashire
Post
each gamebase requires it's own set of emulators entering in the gemus.dat file.
you can not use the c64 one.
edit the gemus.dat in a text editor and see if the spectrum emulators are included.
count down 15 lines and show me the problem.
the emulator setup wizard only creates the emulators.ini file.
So the sample emulators.ini posted will also fix your problem, if you copy your spectrum emulators to the new gamebase directory.
you can not use the c64 one.
edit the gemus.dat in a text editor and see if the spectrum emulators are included.
count down 15 lines and show me the problem.
the emulator setup wizard only creates the emulators.ini file.
So the sample emulators.ini posted will also fix your problem, if you copy your spectrum emulators to the new gamebase directory.
- subzero1970
- New Member
Post
ok i appreciate all the help, but i also know i need a seperate emu/front end for each different one, im not stupid, however i got it fixed myself and gbzx is working fine,
thanks .mad. for all your help
thanks .mad. for all your help
Who is online
Users browsing this forum: No registered users and 1 guest