Welcome to the Gamebase 64 forums. An attempt to document ALL Commodore 64 gameware before it's too late!
LINUX SUX
Moderator: Jimbo
- hzwetsloot
- New Member
Post
Another Vic20-emulator can be found on
http://wwwhome.cs.utwente.nl/~schooten/ ... pcvic.html
It even has support for a joystick and some other neat stuff.
http://wwwhome.cs.utwente.nl/~schooten/ ... pcvic.html
It even has support for a joystick and some other neat stuff.
- hzwetsloot
- New Member
Post
Hi gklinger,
>PCVIC runs on a PC with DOS, not a Commodore 64 or 128 in 64 mode.<
Oops! I completely missed that little detail.
Ah, well. At least MaxiDeal now has a choice.
>PCVIC runs on a PC with DOS, not a Commodore 64 or 128 in 64 mode.<
Oops! I completely missed that little detail.
Ah, well. At least MaxiDeal now has a choice.
- sega dude
- New Member
Post
I downloaded this hoping I would be able to run some Vic-20 cassettes I have on my C128. I ran the emulator in C64 mode because the auto boot didn't work. When I load up the emulator and try to load the tape, it goes back to the blue C64 screen and at the top of the screen says SYS49152. At this point to stops the tape and nothing else happens. Is there anything I can do?
- .mad.
- Honoured Member
- Location: Lancashire
Post
The vic20 emu file is ARC'ed (contains several files).
and needs dissolving before you can run it.
i have extracted it for you.
http://www1.datafilehost.com/d/98dae9c6
i would guess it's NEVER going to run your original tapes.
it's more of a BASIC program emulator.
so don't waste too much of your time...
and needs dissolving before you can run it.
i have extracted it for you.
http://www1.datafilehost.com/d/98dae9c6
i would guess it's NEVER going to run your original tapes.
it's more of a BASIC program emulator.
so don't waste too much of your time...
Return to “Commodore Vic20 - GameBaseVIC20”
Who is online
Users browsing this forum: No registered users and 1 guest