Welcome to the Gamebase 64 forums. An attempt to document ALL Commodore 64 gameware before it's too late!
VIC-20 GameBase v4.0
Moderator: Jimbo
- Mayhem
- GB64 Team
- Contact:
- Location: Londonish
Post
Re: VIC-20 GameBase v4.0
At some point I'm going to corall my last WIP on GB20 and send it over to Mad so he can incorporate anything I have that he does not. Maybe even including TacScan...
Lie with passion and be forever damned...
- .mad.
- Honoured Member
- Location: Lancashire
Post
no pressure, i am busy sorting and testing plus4 at the moment with sjakie43.
Re: VIC-20 GameBase v4.0
all gifts greatly received.
no pressure, i am busy sorting and testing plus4 at the moment with sjakie43.
- Mayhem
- GB64 Team
- Contact:
- Location: Londonish
Post
Re: VIC-20 GameBase v4.0
I suppose it's fitting he started it and I took over and really drove it forward, but he's still involved in matters going back to you. Hope you're keeping up with all the new Vic20 releases homebrew wise too!
Lie with passion and be forever damned...
- Paul Irvine
- Cool Member
Post
Re: VIC-20 GameBase v4.0
Hi .mad, I'm also at a loss, deleted the Vic20 gb, uninstalled the gamebase front end, started from scratch. Made sure there was nothing in roaming for Vice.
Reinstalled Gamebase FE, upacked the file from mega, verified all the files...Still the same..
The only thing I can think of is that 'maybe' the script file in the one on Mega isn't exactly the same one you yourself use?
Any chance of posting the Script folder from the Vic-20 that you use..Can't think of anything else, I even stopped my anti virus stuff in case they were not playing nice. My machine is totally clean, I would be annoyed if it wasn't, I'm a fully trained up IT guy (no, not a screen reader at some IT company ) the real thing, Just not fully MS certified (could not afford the wonga for the course).
It's so weird, if I load the files directly via GTKVice and not through the Gamebase, then it all works, so it's not any of the games (I knew they were ok and the WinVice 2.4 happily loaded them via the gamebase.
The only common link is the scripts...
Even after 40years in the industry, I still find myself hating computers
Paul..
Reinstalled Gamebase FE, upacked the file from mega, verified all the files...Still the same..
The only thing I can think of is that 'maybe' the script file in the one on Mega isn't exactly the same one you yourself use?
Any chance of posting the Script folder from the Vic-20 that you use..Can't think of anything else, I even stopped my anti virus stuff in case they were not playing nice. My machine is totally clean, I would be annoyed if it wasn't, I'm a fully trained up IT guy (no, not a screen reader at some IT company ) the real thing, Just not fully MS certified (could not afford the wonga for the course).
It's so weird, if I load the files directly via GTKVice and not through the Gamebase, then it all works, so it's not any of the games (I knew they were ok and the WinVice 2.4 happily loaded them via the gamebase.
The only common link is the scripts...
Even after 40years in the industry, I still find myself hating computers
Paul..
-------
Loved ones are never gone as long as you remember them....
Loved ones are never gone as long as you remember them....
- .mad.
- Honoured Member
- Location: Lancashire
Post
Re: VIC-20 GameBase v4.0
Hi Paul,
here are the scripts...
"autostart-VIC20.d64" keymap and pallette files are important in the scripts folder!
i put them there because i made them, and they are not included in the emulator archive.
so that could be it.
missing "autostart-VIC20.d64" file = broken script = no run emulator.
please can you rem lines out, in the script and debug it.
;Add_CLP( -autostartprgdiskimage "%dbpath%\scripts\autostart-VIC20.d64")
;Add_CLP( -VICextpal -VICpalette "%dbpath%\scripts\WinVICE.vpl")
;Add_CLP( -symkeymap "%dbpath%\scripts\sdl_sym_uk.vkm")
;Add_CLP( -poskeymap "%dbpath%\scripts\sdl_pos_uk.vkm")
;Add_CLP( -symkeymap "%dbpath%\scripts\gtk3_sym_uk.vkm")
;Add_CLP( -poskeymap "%dbpath%\scripts\gtk3_pos_uk.vkm")
here are the scripts...
"autostart-VIC20.d64" keymap and pallette files are important in the scripts folder!
i put them there because i made them, and they are not included in the emulator archive.
so that could be it.
missing "autostart-VIC20.d64" file = broken script = no run emulator.
please can you rem lines out, in the script and debug it.
;Add_CLP( -autostartprgdiskimage "%dbpath%\scripts\autostart-VIC20.d64")
;Add_CLP( -VICextpal -VICpalette "%dbpath%\scripts\WinVICE.vpl")
;Add_CLP( -symkeymap "%dbpath%\scripts\sdl_sym_uk.vkm")
;Add_CLP( -poskeymap "%dbpath%\scripts\sdl_pos_uk.vkm")
;Add_CLP( -symkeymap "%dbpath%\scripts\gtk3_sym_uk.vkm")
;Add_CLP( -poskeymap "%dbpath%\scripts\gtk3_pos_uk.vkm")
- Attachments
-
- vic20-Scripts.zip
- (35.23 KiB) Downloaded 449 times
- sjakie43
- Cool Member
- Location: Netherlands
Post
Re: VIC-20 GameBase v4.0
Great job done so far Mayhem, Thumbs up
Curious about all the goodies you still have
Curious about all the goodies you still have
Sjakie43
Demobase Creator
C64 Maxi with Vic20 mode
THEVIC20 with C64 mode
and more....
Demobase Creator
C64 Maxi with Vic20 mode
THEVIC20 with C64 mode
and more....
- Mayhem
- GB64 Team
- Contact:
- Location: Londonish
Post
Re: VIC-20 GameBase v4.0
https://hewco.itch.io/monster-muncher
Then you get stuff like this, a massive fixed version of Matthew Smith's Monster Muncher game.
Then you get stuff like this, a massive fixed version of Matthew Smith's Monster Muncher game.
I'm sure there's a few things you won't have. An image for Tac-Scan for example. Many of Martijn Wenting's Vic20 games. Stuff like that.
Lie with passion and be forever damned...
- .mad.
- Honoured Member
- Location: Lancashire
- Paul Irvine
- Cool Member
Post
Re: VIC-20 GameBase v4.0
Sorry for the later reply .mad. Ta ior the scripts, sadly no change here. Some prg files work, most don't Wierd, anyway , thanks for helping, sorry it was for nowt.
Paul..
Paul..
-------
Loved ones are never gone as long as you remember them....
Loved ones are never gone as long as you remember them....
- Mayhem
- GB64 Team
- Contact:
- Location: Londonish
Post
Re: VIC-20 GameBase v4.0
I'd forgotten he'd offered them digitally, he sent me the files a long time ago for my perussal. Or do you mean you bought the tapes and dumped them?
Lie with passion and be forever damned...
- .mad.
- Honoured Member
- Location: Lancashire
Post
ZX81, PET, VIC-20...
like yourself, been sat on the files for a long time.
Re: VIC-20 GameBase v4.0
we bought some of the digitals when doing the PET gamebase, and was sent them all.
ZX81, PET, VIC-20...
like yourself, been sat on the files for a long time.
- .mad.
- Honoured Member
- Location: Lancashire
Post
try loading...
Abductor.prg (no spaces in filename).
does it work?
you say Acey Ducey didn't work
Acey^Ducey.prg - rename to AceyDucey.prg and relink file.
does it work now?
Re: VIC-20 GameBase v4.0
i wonder if it has anything to do with spaces in the file names, and your setup.Paul Irvine wrote: ↑Fri Sep 27, 2024 10:17 amSorry for the later reply .mad. Ta ior the scripts, sadly no change here. Some prg files work, most don't Wierd, anyway , thanks for helping, sorry it was for nowt.
Paul..
try loading...
Abductor.prg (no spaces in filename).
does it work?
you say Acey Ducey didn't work
Acey^Ducey.prg - rename to AceyDucey.prg and relink file.
does it work now?
- .mad.
- Honoured Member
- Location: Lancashire
Post
Re: VIC-20 GameBase v4.0
Just for info.
Spaces in filenames was the problem for Paul.
it was fixed with the updated GEMUS.dll (2019).
so i guess no one else had any problems?.
or has bothered to play with VIC-20.
Spaces in filenames was the problem for Paul.
it was fixed with the updated GEMUS.dll (2019).
so i guess no one else had any problems?.
or has bothered to play with VIC-20.
- sjakie43
- Cool Member
- Location: Netherlands
Post
Re: VIC-20 GameBase v4.0
You know better than that Mad
No problems here fortunate
Regards
No problems here fortunate
Regards
Sjakie43
Demobase Creator
C64 Maxi with Vic20 mode
THEVIC20 with C64 mode
and more....
Demobase Creator
C64 Maxi with Vic20 mode
THEVIC20 with C64 mode
and more....
- .mad.
- Honoured Member
- Location: Lancashire
Post
Re: VIC-20 GameBase v4.0
fixed command-line in script for vic-20.
for use with latest gtk3 version.
problem.
too many quotes when using the fixed gemus.dll.
fix.
removed quotes from -autostart "%gamepathfile%"
if you don't have the gemus.dll
try using short filenames in emulators.ini.
for use with latest gtk3 version.
problem.
too many quotes when using the fixed gemus.dll.
fix.
removed quotes from -autostart "%gamepathfile%"
if you don't have the gemus.dll
try using short filenames in emulators.ini.
- Attachments
-
- GTK3VICE38.zip
- (3.61 KiB) Downloaded 187 times
Return to “Commodore Vic20 - GameBaseVIC20”
Who is online
Users browsing this forum: No registered users and 0 guests