Hi Guy's,
i've made a small GameBase for the Sord M5 (For GameBase 1.3)
It Contains 32 Gamedumps, and 2 or more Screenshots each Game.
You can get it on UG : (2,4 MB) here
An Emulator (Emu M5) is also inside.
But this Emu plays only the "*.rom" - Dumps !
So you also need the Emu MESS 115b .
The latest MESS SVN should also work.
Note :
The *.cas-files will not work with the Script, when putting the MESS inside the GameBase-Folder !!!
So, put MESS somewhere else !
The Script, i've wrote to run the Games, is not perfect !
So, i need your help here !
@K.C. , .mad. & lord_kelevar : (and all other, who can help )
I need a Script similar to the "Philips VG 5000" Script.
That means :
1. When using the Emulator "M5" , the Games starts not automatically.
You have to select 1.cart 2.open 3.choose rom
I think this emu don't use any comandlines....
so maybe an AutoIt-Script should work here !?
2. When using MESS for *.rom-dumps :
Thats o.k. ...... you only have to put a key, to start the Game.
3. When using MESS for *.cas-dumps :
- You have to press a Key,
- Type "chain" (and sometimes) "tape" at the prompt on the MESS-Window
- press Enter
- Now, the Tape is loading, and starts.
So, i do also need an AutoIt-Script to run this Games.....
4. I Can't figure out , how to use the Joystick with MESS.
Maybe it's not supported yet....(comandline: -joystick don't work for me)
- my gamepad works left,right,up,down,....but no Firebutton works...
It works with Emu M5 (But this Emu is only for the *.rom-dumps)
So, help please
Get MESS 115b here
Get MESS SVN here
Regards,
Vicman
Welcome to the Gamebase 64 forums. An attempt to document ALL Commodore 64 gameware before it's too late!
GameBase Sord M5
Moderator: Jimbo
- Vicman
- Cool Member
- Location: Germany
Post
IMPORTANT:
I've forgotten something.....
To run the Sord M5 in MESS, you will also need the :
1.Sord M5 BIOS file and
2.Sord M5 BASIC-I file
Put the sordm5.zip in MESS 115b subfolder roms ,
and the basic-i.zip in MESS 115b subfolder software.
I've forgotten something.....
To run the Sord M5 in MESS, you will also need the :
1.Sord M5 BIOS file and
2.Sord M5 BASIC-I file
Put the sordm5.zip in MESS 115b subfolder roms ,
and the basic-i.zip in MESS 115b subfolder software.
GB done: Philips VG 5000, Sord-M5, Acorn Atom, Enterprise v1.00
- Vicman
- Cool Member
- Location: Germany
Post
Hi all,
lord_kelevar has written me a small, but perfect script, to autorun the Games in the GB.
Thank you lord_kelevar
Please note :
Be sure, to rename the Sord M5 - Folder & *.mdb in Sord-M5 or SordM5.
This way, MESS do also work inside the GB-Folder !
If you have any space in the pathname, MESS don't work correct with *.cas-files
Thanks to mcx997 for this research
lord_kelevar has written me a small, but perfect script, to autorun the Games in the GB.
Thank you lord_kelevar
Please note :
Be sure, to rename the Sord M5 - Folder & *.mdb in Sord-M5 or SordM5.
This way, MESS do also work inside the GB-Folder !
If you have any space in the pathname, MESS don't work correct with *.cas-files
Thanks to mcx997 for this research
Code: Select all
;............................
;NOTE : Sord M5 Script ! :
;...........................:
;by lord_kelevar 04/06/2010
;This script only works with Mess 115b
;It should also work with the latest Mess SVN
;...........
;Important :
;..........:
;Rename the GB-Folder & the *.mdb from Sord M5 to Sord-M5.
;(without any space in the pathname)
;otherwise the *.cas-files don't work with MESS
;This Script starts only the File Type "*.rom" and "*.cas" automatically.
; Startup keytypes:
; Startup=tape - Default startup option to load the cassette
; Startup=chain - Alternative command for loading cassette
If GameType CONTAINS(rom)
Add_CLP(sordm5 -joystick -window -cart %gamepathfile%)
Run_Emulator_Send_Keys([4]{SPACE}||200)
ElseIf GameType CONTAINS(cas)
Add_CLP(sordm5 -joystick -window -cart %emupath%\software\basic-i.zip -cass %gamepathfile%)
If Key_startup CONTAINS(chain)
Run_Emulator_Send_Keys([4]{SPACE}[5]chain{ENTER}||200)
Else
Run_Emulator_Send_Keys([4]{SPACE}[5]tape{ENTER}||200)
End If
End If
Last edited by Vicman on Tue Jun 22, 2010 8:47 am, edited 1 time in total.
GB done: Philips VG 5000, Sord-M5, Acorn Atom, Enterprise v1.00
- lord_kelevar
- New Member
Post
Just a quick comment to add to what vicman posted
the script will only work with the older mess emulator mess 115b
the newer emulator uses different keyboard input (raw input)
the script will only work with the older mess emulator mess 115b
the newer emulator uses different keyboard input (raw input)
- dax
- Ice Cool Member
- Location: Poland
Post
I put MESS 115b in Program Files directory, everything configured properly, but MESS 115b does not run .CAS files. Only black DOS window appears for a while. Same situation when I put MESS to C:\MESS 115. Even if I copy MESS to the same logical disk as GameBase is, but NOT in GameBase folder (MESS for example in E:\MESS 115) it does not work either. I use the newest script by lord_kelevar. My Paths.ini:
Anyone knows a solution for this ?
Tested on Win'XP x86 and Win'7 x64.[Emulators]
1=Mess 115b
2=Emu M5
3=
[Mess 115b]
UseShortFilenames=0
UseDefaultTypes=0
SupportedTypes=rom;cas
EmulatorPathFile=C:\MESS 115\mess.exe
ScriptFile=MESS 115b.txt
WaitFinish=1
1=
[Emu M5]
UseShortFilenames=0
UseDefaultTypes=0
SupportedTypes=rom
EmulatorPathFile=.\Sord M5\Emulators\m5\m5.exe
ScriptFile=Emu5.txt
WaitFinish=1
1=
Anyone knows a solution for this ?
- Vicman
- Cool Member
- Location: Germany
Post
Hi mcx997,
have you setup mess 115b correct ?
meaning :
the sord m5 bios (sordm5.zip) in folder "roms"
the "basic-i.zip" in folder "software"
also :
start the messgui.exe
go to OPTIONS/DIRECTORIES... setup the ROMs-directorie
(the sordm5.zip)
then :
Go to SORD M5 , right-mouse-button , go to "Properties"
select "Software" and setup :
MESS/Software for the "basic-i.zip"
In Gamebase Sord M5 :
select a game, wich need the load-command "chain" .
Press F2 (to open the k=v pairs option-window)
Type : Use startup=chain (you don't need to do this with "tape" *.cas)
this way it works for me.....
have you setup mess 115b correct ?
meaning :
the sord m5 bios (sordm5.zip) in folder "roms"
the "basic-i.zip" in folder "software"
also :
start the messgui.exe
go to OPTIONS/DIRECTORIES... setup the ROMs-directorie
(the sordm5.zip)
then :
Go to SORD M5 , right-mouse-button , go to "Properties"
select "Software" and setup :
MESS/Software for the "basic-i.zip"
In Gamebase Sord M5 :
select a game, wich need the load-command "chain" .
Press F2 (to open the k=v pairs option-window)
Type : Use startup=chain (you don't need to do this with "tape" *.cas)
this way it works for me.....
GB done: Philips VG 5000, Sord-M5, Acorn Atom, Enterprise v1.00
- dax
- Ice Cool Member
- Location: Poland
Post
Vicman: tnx for professional reply.
I've checked it and now I'm sure for 1 thing. MESS does not run CHAIN files (maybe also CAS) if path to emulator contains at least 1 SPACE character. I renamed MDB to "sordm5.mdb", folder to "sordm5", changed every path to "sordm5" instead of "sord m5", MESS is inside "GameBase\SordM5" folder and everything works properly.
Conclusion: MESS can be run from GameBase folder for every game (cas, chain, rom), until path to MESS does not have a space. And that was my problem (same if MESS was run from outside of GameBase folder).
I've checked it and now I'm sure for 1 thing. MESS does not run CHAIN files (maybe also CAS) if path to emulator contains at least 1 SPACE character. I renamed MDB to "sordm5.mdb", folder to "sordm5", changed every path to "sordm5" instead of "sord m5", MESS is inside "GameBase\SordM5" folder and everything works properly.
Conclusion: MESS can be run from GameBase folder for every game (cas, chain, rom), until path to MESS does not have a space. And that was my problem (same if MESS was run from outside of GameBase folder).
- Vicman
- Cool Member
- Location: Germany
Post
Here you are
http://rapidshare.com/files/436641703/Sord_M5.zip
http://rapidshare.com/files/436641703/Sord_M5.zip
GB done: Philips VG 5000, Sord-M5, Acorn Atom, Enterprise v1.00
- Vicman
- Cool Member
- Location: Germany
Post
Hi nitrofurano,
i post your PM here to this topic.
Hope it's ok. Because i can't help you here...
never used linux, and i'm not so fit with mess...
So, maybe someone else can help here :
i post your PM here to this topic.
Hope it's ok. Because i can't help you here...
never used linux, and i'm not so fit with mess...
So, maybe someone else can help here :
do you know how can i run VG5000 and Sord emulation on Linux, specially from Mess? (i placed the Sord rom files at '~/.mess/roms' and nothing happened ) - i also tried to compile dcvg5k-v2, but it were unsuccessful
GB done: Philips VG 5000, Sord-M5, Acorn Atom, Enterprise v1.00
Return to “Other GameBase Projects”
Who is online
Users browsing this forum: No registered users and 7 guests